Requirements
Ensure all IPSec connections are initiated by Jamf. Jamf Security Cloud infrastructure will not accept any incoming IPSec start or INIT commands from customer firewalls.
Open the following ports to the IP address you are using for this interconnect from Jamf IP addresses in the region you defined during setup:
Protocol ESP
UDP Traffic on Port 500 (ISAKMP)
UDP Traffic on Port 4500 (NAT-T)
Using your VPN appliance's IPSec configuration interface, create an IPSec tunnel with the parameters defined while setting up the gateway in Jamf Security Cloud.
To review important configuration details as configured on the Jamf Security Cloud side of the connection, click Actions, then select .