Setting Up the Healthcare Listener - Healthcare Listener Installation and Configuration Guide

Healthcare Listener Installation and Configuration Guide
Solution
Application
Content Type
Technical Documentation
Utilities & Services
Healthcare Listener
ft:locale
en-US
  1. In Jamf Pro, click Settings in the sidebar.
  2. In the Server section, click Infrastructure Managers .
  3. In the list of Jamf Infrastructure Manager instances and their installed services, click the instance with the Healthcare Listener that you want to configure.
  4. Click Edit .
  5. Select the Enable Healthcare Listener checkbox.
  6. Enter a display name for the Healthcare Listener.

    This is the name that is displayed for the Healthcare Listener on the Jamf Infrastructure Manager

  7. To specify the IP addresses to accept incoming ADT messages from, do one of the following:

    • Select All IP addresses to accept incoming messages from any IP address.

    • Select Single IP address or Range of IP addresses to specify the IP addresses to accept incoming ADT messages from, and do the following:

      1. To specify a single IP address, click the (+) Add button for Single and enter the IP address.

      2. To specify a range of IP addresses, click the (+) Add button for Range and enter the starting and ending IP addresses.

  8. Enter the port number of your healthcare management system.
  9. Click Save .

After the Healthcare Listener is set up, you can add rules. Adding a rule enables Jamf Pro to send remote commands to devices.