Enrolling a Computer or Mobile Device via Automated Device Enrollment - Elevate Documentation

Elevate Documentation
Solution
Application
Content Type
Technical Documentation
Utilities & Services
ft:locale
en-US

You can enroll a new or factory-reset computer or mobile device that has been assigned to your associated Elevate MDM server in Apple Business. The device enrolls automatically when it is powered on and progresses through Setup Assistant.

Requirements
  • The device must be assigned to your MDM server in Apple Business. Devices purchased through Apple or authorized resellers can be automatically assigned, or you can manually add devices using Apple Configurator.
  • Automated Device Enrollment must be configured in Elevate. To configure Automated Device Enrollment, click Enrollment in the sidebar, and then click Set up on the Automated Enrollment card.
  1. After powering on the device, follow the on-screen prompts in Setup Assistant.

    If prompted, choose to set up the device as new. Do not transfer data from another device or restore from a backup.

  2. Connect to a Wi-Fi or Ethernet network when prompted.
    Note:A network connection is required for the device to communicate with Apple Business and the Elevate MDM server.
  3. On the Remote Management screen, follow the on-screen prompts to enroll the device.
  4. Complete the remaining Setup Assistant screens to finish setting up the device.

The device is enrolled and managed by Elevate. To verify enrollment, navigate to Devices > All Devices in Elevate and confirm the device appears in the list.